List of 96-well microplates
CR1496:
Polypropylene square 96-deepwell microplates
•
made from polypropylene (by HJ-bioanalytik)
•
square wells of 8x8 mm, 40 mm deep
•
round bottom
•
volume per well: 2.2 ml
•
recommended culture volume: 0.5 ml
•
typical shaking conditions: 300 rpm/50 mm
•
top surface: flattened/polished by Enzyscreen
•
detoxified (removal of leachables) by Enzyscreen in 0.1 M NaOH and
HCl respectively (4 hours each)
•
long "track record" for cultivation purposes: has been used by many
research groups for many years (both for microbial strains and
animal cells)
•
autoclavable (with sandwich cover on top, if desired)
CR1496a:
Polypropylene square 96-deepwell microplates
•
as CR1496 , but with 4 cavities to fit covers with pins
•
also suitable for covers CR1296b, CR1296c, CR1396b, and
CR1396c (which have pins at the inside to hold the silicone layer up
at all times: especially for robotic applications)
CR1496c:
Polystyrene transparent square 96-half-deepwell microplates
•
made from pure (no additives used) transparent polystyrene
•
square wells of 8x8 mm, 17 mm deep
•
pyramid bottom for easy centrifugation of cells (pellet in centre well)
•
volume per well: 1.1 ml
•
recommended culture volume: 0.3 ml
•
typical shaking conditions: 225 rpm/50 mm, or 300 rpm/25 mm
•
individually wrapped/sealed in polyethylene foil
•
gamma irradiated
•
packed in boxes of 16
•
single use (non-autoclavable)
CR1496p:
Polypropylene square 96-deepwell microplates
•
made from very clean polypropylene (by Eppendorf)
•
square wells of 8x8 mm, 40 mm deep
•
round bottom
•
volume per well: 2.2 ml
•
recommended culture volume: 0.5 ml
•
typical shaking conditions: 300 rpm/50 mm
•
autoclavable (with sandwich cover on top, if desired)
CR1496e:
Polystyrene grey square 96-half-deepwell microplates
•
made from pure (no additives used) grey polystyrene
•
square wells of 8x8 mm, 17 mm deep
•
transparent polystyrene bottom
(attached by laser-welding, so no glue used)
•
volume per well: 1.1 ml
•
recommended culture volume: 0.3 ml
•
typical shaking conditions: 225 rpm/50 mm, or 300 rpm/25 mm
•
individually wrapped/sealed in polyethylene foil
•
gamma irradiated
•
packed in boxes of 16
•
single use (non-autoclavable)
CR1496f:
Polystyrene black square 96-half-deepwell microplates
•
made from pure (no additives used) black polystyrene
•
square wells of 8x8 mm, 17 mm deep
•
transparent polystyrene bottom
(attached by laser-welding, so no glue used)
•
volume per well: 1.1 ml
•
recommended culture volume: 0.3 ml
•
typical shaking conditions: 225 rpm/50 mm, or 300 rpm/25 mm
•
individually wrapped/sealed in polyethylene foil
•
gamma irradiated
•
packed in boxes of 16
•
single use (non-autoclavable)
CR1496dg:
Polystyrene greyish-white square 96-half-deepwell microplates
with transparent bottom
•
made from pure (no additives used) very light grey polystyrene
•
light greyish color fully eliminates cross-talk
•
square wells of 8x8 mm, 17 mm deep
•
transparent polystyrene bottom
(attached by laser-welding, so no glue used)
•
volume per well: 1.1 ml
•
recommended culture volume: 0.3 ml
•
typical shaking conditions: 225 rpm/50 mm, or 300 rpm/25 mm
•
individually wrapped/sealed in polyethylene foil
•
gamma irradiated
•
packed in boxes of 16
•
single use (non-autoclavable)
•
for Growth Profiler 960 use only