Maintenance, replication and growth in microplates
Contact us: info@enzyscreen.com
Maintenance, replication and growth in microplates
Contact us:  info@enzyscreen.com
Categories
CR0021a: Carbon clamp unit for flushing purposes
  • For cultures in MTPs that need a specific gas atmosphere
  • Has a gas inlet and gas outlet (for anearobic growth, or for CHO-cell that need 5% CO2)
  • Has an EPDM rubber seal (creates a gastight chamber above the sandwich cover)
Information and orders
CR0021b: Carbon clamp unit with anti fly-out brackets
  • Clamp unit with brackets to prevent plates from 'flying out'
  • Suitable for all universal clamp systems
Information and orders
CR1000: Replicator with 96 pins
  • Replicator with 96 stainless steel pins of a 3mm diameter
Information and orders
CR1024: Replicator with 24 pins
  • Replicator with 24 stainless steel pins of a 3mm diameter
Information and orders
CR1100: Replicator Press
  • Press for both 24 and 96 pin replicators
  • Ensures an accurate vertical movement when sampling

 

Information and orders
CR1200: Sandwich cover with no holes in the silicone layer
  • Solid silicon layer of 5mm thick with no holes
  • Available with silicon or butylrubber
Information and orders
CR1206: Sandwich cover for 6-deepwell MTPs
  • For 6-deepwell MTPs CR1406
  • Holes with a 7mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 20 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 400 µl/well/day
Information and orders
CR1206a: Low-evaporation sandwich cover for 6-deepwell MTPs
  • For 6-deepwell MTPs CR1406
  • Holes with a 4mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 6.5 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 130 µl/well/day
Information and orders
CR1224: Sandwich cover for 24 deepwell MTPs
  • For all 24-deepwell MTPs
  • Holes with a 2.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 2.5 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 50 µl/well/day
Information and orders
CR1224a: Low-evaporation sandwich cover for 24-deepwell MTPs
  • For all 24-deepwell MTPs
  • Holes with a 1.2mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.7 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 16 µl/well/day
Information and orders
CR1224b: Sandwich cover with pins for 24-deepwell MTPs
  • For 24-deepwell MTPs with cavaties, such as CR1424cl
  • Holes with a 2.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 2.5 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 50 µl/well/day
Information and orders
CR1224c: Low-evaporation sandwich cover with pins for 24-deepwell MTPs
  • For 24-deepwell MTPs with cavaties, such as CR1424cl
  • Holes with a 1.2mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.7 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 16 µl/well/day
Information and orders
CR1224d: Sandwich cover for 24-deepwell MTPs
  • For all 24-deepwell MTPs
  • Holes with a 2.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 2.5 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 50 µl/well/day
Information and orders
CR1224e: Low-evaporation sandwich cover for 24-deepwell MTPs
  • For all 24-deepwell MTPs
  • Holes with a 1.2mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.7 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 16 µl/well/day
Information and orders
CR1224f: Sandwich cover with pins for 24-deepwell MTPs
  • For 24-deepwell MTPs with cavaties, such as CR1424cl
  • Holes with a 2.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 2.5 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 50 µl/well/day
Information and orders
CR1224g: Low-evaporation sandwich cover with pins for 24-deepwell MTPs
  • For 24-deepwell MTPs with cavaties, such as CR1424cl
  • Holes with a 1.2mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.7 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 16 µl/well/day
Information and orders
CR1224h: Sandwich cover for extra high 24-deepwell MTPs from HJ-Bioanalytik
  • For CR1424i & CR1424hf MTPs
  • Holes with a 2.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 2.5 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 50 µl/well/day
Information and orders
CR1224i: Low-evaporation sandwich cover for extra high 24-deepwell MTPs from HJ-Bioanalytik
  • For CR1424i & CR1424hf MTPs
  • Holes with a 1.2mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.7 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 16 µl/well/day
Information and orders
CR1224t: CO2-release sandwich cover for 24-deepwell MTPs
  • For all 24-deepwell MTPs
  • Holes with a 0.1mm diameter (FEP tubes)
  • Suitable for anaerobic cultivation
  • Exchange of headspace air: 0.004 ml / minute
Information and orders
CR1296: Sandwich cover for 96-deepwell MTPs
  • For all 96-deepwell MTPs
  • Holes with a 1.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 1 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 22 µl/well/day
Information and orders
CR1296a: Low-evaporation sandwich cover for 96-deepwell MTPs
  • For all 96-deepwell MTPs
  • Holes with a 0.8mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.3 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 8 µl/well/day
Information and orders
CR1296b: Sandwich cover with pins for 96-deepwell MTPs
  • For 96-deepwell MTPs CR1496a only
  • Holes with a 1.5mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 1 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 22 µl/well/day
Information and orders
CR1296c Low-evaporation sandwich cover with pins for 96-deepwell MTPs
  • For 96-deepwell MTPs CR1496a only
  • Holes with a 0.8mm diameter
  • Suitable for longer cultivations (4+ days)
  • Exchange of headspace air: 0.3 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 8 µl/well/day
Information and orders
CR1296t: CO2-release sandwich cover for 96-deepwell MTPs
  • For all 96-deepwell MTPs
  • Holes with a 0.075mm diameter (PEEK tubes)
  • Suitable for anaerobic cultivation
  • Exchange of headspace air: 0.003 ml / minute
Information and orders
CR1306: Sandwich cover for 6-lowwell MTPs
  • For 6-lowwell MTPs
  • Holes with a 1.5mm diameter
  • Exchange of headspace air: 1 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 22 µl/well/day
Information and orders
CR1324: Sandwich cover for 24-lowwell MTPs
  • For 24-lowwell MTPs
  • Multiple formats available: check product page
Information and orders
CR1384: Sandwich cover for 384-well MTPs
  • For 384-well MTPs
  • Holes with a 0.6mm diameter
  • Due to surface tension, OTR may be low (non-specified)
Information and orders
CR1396b: Standard sandwich cover with pins for Enzyscreen 96-half-deepwell MTPs
  • For our polystyrene 96-half-deepwells such as CR1496c and CR1496dg
  • Holes with a 0.8mm diameter
  • Exchange of headspace air: 0.3 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 8 µl/well/day
Information and orders
CR1406: Polystyrene transparent 6-deepwell microplates with polystyrene lid
  • 6-deepwell microplate made of pure (no additives used) polystyrene, supplied with lid on top
  • Recommended culture volume of 25-35ml
  • Sterilised by gamma irradiation
  • Pyramid bottom for easy centrifugation of cells (pellet in centre well)
Information and orders
CR1424: Polypropylene square 24-deepwell microplates
  • Made from polypropylene (by HJ-bioanalytik)
  • Recommended culture volume: 2.5 ml
  • Autoclavable, reusable plate
  • Flattened and detoxified by Enzyscreen
Information and orders
CR1424a: Polypropylene square 24-deepwell microplates
  • Made from polypropylene (by HJ-bioanalytik)
  • With 4 cavaties to accomodate sandwich covers with pins
  • Recommended culture volume: 2.5 ml
  • Autoclavable, reusable plate
  • Flattened and detoxified by Enzyscreen
Information and orders
CR1424cl: Polystyrene transparent square 24-deepwell microplates with polystyrene lid
  • 24-deepwell microplates made of pure (no additives used) polystyrene
  • Recommended culture volume of 2.5ml
  • Sterilised by gamma irradiation
  • Pyramid bottom for easy centrifugation of cells (pellet in centre well)
Information and orders
CR1424d: Polystyrene grey square 24-deepwell microplates with a transparent bottom
  • 24-deepwell microplates made of pure (no additives used) polystyrene
  • Recommended culture volume of 2.5ml
  • Sterilised by gamma irradiation
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
Information and orders
CR1424dg: Polystyrene greyish-white square 24-deepwell microplates with a transparent bottom
  • 24-deepwell microplates made of pure (no additives used) polystyrene
  • Recommended culture volume of 2.5ml
  • Sterilised by gamma irradiation
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
Information and orders
CR1424f: Polystyrene white round 24-well microplates with a transparent bottom and polystyrene lid
  • 24-well microplates made of polystyrene (by Porvair)
  • Recommended culture volume of 1ml
  • Sterilised by gamma irradiation
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
Information and orders
CR1424hd: Extra high polypropylene square deepwell microplates
  • Made from polypropylene (by HJ-bioanalytik)
  • Recommended culture volume: 5-7ml
  • Autoclavable, reusable plate
  • Flattened and detoxified by Enzyscreen
Information and orders
CR1496: Polypropylene square 96-deepwell microplates
  • Made from polypropylene (by HJ-bioanalytik)
  • Recommended culture volume: 0.5 ml
  • Autoclavable, reusable plate
  • Flattened and detoxified by Enzyscreen
Information and orders
CR1496a: Polypropylene square 96-deepwell microplates
  • Made from polypropylene (by HJ-bioanalytik)
  • With 4 cavaties to accomodate sandwich covers with pins
  • Recommended culture volume: 0.5 ml
  • Autoclavable, reusable plate
  • Flattened and detoxified by Enzyscreen
Information and orders
CR1496c: Polystyrene transparent square 96-half-deepwell microplates
  • 96-half-deepwell microplates made of pure (no additives used) polystyrene
  • Recommended culture volume of 0.3ml
  • Sterilised by gamma irradiation
  • Pyramid bottom for easy centrifugation of cells (pellet in centre well)
  • Stackable in our universal clamping systems
Information and orders
CR1496dc: COC grey square 96-half-deepwell microplates with a transparent bottom
  • 96-half-deepwell microplates made of COC
  • Recommended culture volume of 0.3ml
  • Sterilised by gamma irradiation
  • Resistant to certain aggressive solvents
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
     
Information and orders
CR1496dg: Polystyrene greyish-white square 96-half-deepwell microplates with a transparent bottom
  • 96-half-deepwell microplates made of polystyrene
  • Recommended culture volume of 0.3ml
  • Sterilised by gamma irradiation
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
Information and orders
CR1496e: Polystyrene grey square 96-half-deepwell microplates with a transparent bottom
  • 96-half-deepwell microplates made of polystyrene
  • Recommended culture volume of 0.3ml
  • Sterilised by gamma irradiation
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
Information and orders
CR1496f: Polystyrene black square 96-half-deepwell microplates with a transparent bottom
  • 96-half-deepwell microplates made of polystyrene
  • Recommended culture volume of 0.3ml
  • Sterilised by gamma irradiation
  • Has a transparant bottom and thus suitable for use in the Growth Profiler 
Information and orders
CR1496p: Polypropylene square 96-deepwell microplates
  • Made from polypropylene (by Eppendorf)
  • Recommended culture volume: 0.5 ml
  • Autoclavable, reusable plate
  • Alternative to the CR1496 plate
Information and orders
CR1524: Sandwich cover for polystyrene 24-lowwell MTPs from Corning
  • For 24-lowwell MTPs from Corning
  • Holes with a 1mm diameter
  • Suitable for shorter cultivations (1-5 days)
  • Exchange of headspace air: 1.1 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 30 µl/well/day
Information and orders
CR1524a: Low-evaporation sandwich cover for polystyrene 24-lowwell MTPs from Corning
  • For 24-lowwell MTPs from Corning
  • Holes with a 0.2mm diameter in a stainless steel foil
  • Suitable for longer  cultivations (4+ days)
  • Exchange of headspace air: 0.25 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 6 µl/well/day
Information and orders
CR1596: Sandwich cover for polystyrene 96-lowwell MTPs
  • For 96-lowwell MTPs with holes in between the wells
  • Holes with a 0.2mm diameter in a stainless steel foil
  • Exchange of headspace air: 0.25 ml / minute
  • Evaporation rate (30ºC, 50% humidity): 6 µl/well/day
Information and orders
CR1601: Universal clamp in gas-tight box
  • Two position universal clamp in gas-tight box
  • Allows air control of your cultures
Information and orders
CR1603h: 2 position universal clamp
  • With anti fly-out brackets to support safe stacking of MTPs
  • Also suitable for extra high deepwell MTPs + covers (CR1406 and CR1424i)
  • Fits various shaker platforms
Information and orders
CR1700: 4 position clamp for deepwell MTPs
  • Secures up to 4 deepwell MTPs + covers
  • Fits various shaker platforms
Information and orders
CR1701: 4 position clamp for extra high deepwell MTPs
  • Secures up to 4 extra high deepwell MTPs + covers (CR1424i, CR1406)
  • Fits various shaker platforms
Information and orders
CR1702: 2 position clamp for deepwell MTPs
  • Secures up to 2 deepwell MTPs + covers
  • Fits various shaker platforms
Information and orders
CR1703: 3 position clamp for deepwell MTPs
  • Secures up to 3 deepwell MTPs + covers
  • Fits Eppendorf/New Brunswick platforms only (S41i)
Information and orders
CR1705: 5 position clamp for deepwell MTPs
  • Secures up to 5 deepwell MTPs + covers
  • Fits Eppendorf/New Brunswick platforms only (S44i)
Information and orders
CR1801h: 4 position universal clamp
  • With anti fly-out brackets to support safe stacking of MTPs
  • Also suitable for extra high deepwell MTPs + covers (CR1406 and CR1424i)
  • Fits various shaker platforms
Information and orders
CR1802: 4 position universal clamp to be used with PreSens SDR units
  • Secures up to 4 deepwell MTPs + covers + SDR units by PreSens
  • Fits various shaker platforms
  • Also available in 2, 3, 5 position and Kuhner EPFL-tray/table formats
Information and orders
CR1803hh: 3 position universal clamp
  • With anti fly-out brackets to support safe stacking of MTPs
  • Also suitable for extra high deepwell MTPs + covers (CR1406 and CR1424i)
  • Fits Eppendorf/New Brunswick platforms only (S42i)
Information and orders
CR1805hh: 5 position universal clamp
  • With anti fly-out brackets to support safe stacking of MTPs
  • Also suitable for extra high deepwell MTPs + covers (CR1406 and CR1424i)
  • Fits Eppendorf/New Brunswick platforms only (S44i)
Information and orders
CR9001: Growth Profiler
  • Generates growth curves of up to 960 microbial cultures (10 MTPs) in microtiter plates
  • Suitable for bacterial, yeast and cell cultures
  • Temperature controlled
Information and orders